Showcase
Microstructure
A part is presented with 4 thin walls. These thin walls have a height of 1,5mm, a length of 7mm and a thickness varying from 60 micrometer, 45 micrometer, 30 micrometer down to 15 micrometer in tooling steel. Read more…
Turbine blade
A turbine blade is characterized by its free model and complex 3D design on the surface and tight tolerances on the leading and trailing edges. Blades or vanes are often designed in Titanium or Nickel based alloys as Inconel. Read more…
Gearwheel
Gears or couplings with typical designed teeth are used in applications as torque multiplier or are employed for the indexing function. Read more…
Medical micro pins
Micro pins with a high aspect ratio (length over diameter) as these pins are unique by its density (4000 pins per cm2). These pins have a diameter of 60-70 micron and a height over 500 micrometer. This combination of density and ratio makes this part difficult or impossible to machine by other techniques. Read more…
Helix pump
The presented part is a helix tube with an internally complex shaped geometry. Read more…
Turbine wheel
A turbine wheel, a small wheel with a diameter of 25mm, is presented with curved vanes on the ring. Read more…
Watch Case
A watch case is presented as a demonstrator. This part shows the ability of ECM to machine 3D shapes with an electrode with the inverse shape. Read more…
Fuel Cell
Sheet of 90 by 90 mm, showing a line structure rectangular machined both sides. The presented sheets are used as sheets in a Fuel Cell stack. These stacks are designed to have an uniform distribution of reactants to each cell. Different designs can be manufactured to create enlarged reaction surfaces. Read more…
Turbo Charger
A nozzle ring as presented is a ring with vanes. These rings can vary in diameter from small (20mm diameter) up to large sized parts (300mm diameter). The vanes a characterized by its tight tolerances on the blade, position, edges and surface finish. Read more…
